Welcome to T-LON Products, Inc.

Bore Diameter	Groove
Bore Diameter	Depth	Tol.
0.970 / 2.970	0.155	±004
2.971 / 5.220	0.280
5.220 / 8.970	0.381
8.970 / 14.970	0.439
14.970 / 30.030	0.698

T-LON "R" Series Piston Seals, made of fluorinated polymer, are fortified with either glass fiber or bronze flakes. Used in combination with a square rubber loader ring or an elastomer O-Ring, this reliable system produces long wearing piston seals for reciprocating hydraulic or pneumatic cylinders.

SUPERIOR PROPERTIES:

Chemical Inertness

Heat Resistance

Low Coefficient of Friction

Excellent Dielectric Properties

Weather Resistance

Moisture-Resistance

Toughness & Flexibility

Non-Adhesive Characteristics

Non-Flammability

Flexibility at Low Temperature

T-LON "R" Series Piston Seal Sizes
Groove dimentions conform to American National Standard,
ANSI B93.32-1973 and NFPA T3.19.18

Part No.	Bore Dia. ±.002 (C)	Groove Dimension		Ring Dimension			SAE AS568A Loader No.
Part No.	Bore Dia. ±.002 (C)	Dia ±.002 (A)	Width ±.002 (B)	Ring O.D. Dia (D)	C-S ±.003 (T)	Width ±.002 (H)	SAE AS568A Loader No.
R-1	1.000	0.692	0.129	1.030-1.036	0.070	0.119	-115
R-2	1.250	0.942		1.280-1.287			-119
R-3	1.500	1.192		1.530-1.539			-123
R-4	1.750	1.443		1.780-1.790			-127
R-5	2.000	1.693		2.030-2.042			-131
R-6	2.250	1.943		2.280-2.293			-135
R-7	2.500	2.193		2.530-2.545			-139
R-8	2.750	2.443		2.780-2.796			-143
R-9	3.000	2.443	0.284	3.030-3.048	0.090	0.272	-333
R-10	3.250	2.695		3.280-3.299			-335
R-11	3.500	2.945		3.530-3.551			-337
R-12	3.750	3.195		3.780-3.802			-339
R-13	4.000	3.445		4.030-4.054			-341
R-13.5	4.125	3.570		4.155-4.179			-342
R-14	4.250	3.695		4.280-4.305			-343
R-15	4.500	3.945		4.530-4.557			-345
R-16	4.750	4.195		4.780-4.809			-347
R-17	5.000	4.445		5.030-5.060			-349

Max. Recommended Diametral Clearance - Inches
Bore Size No.	PSI
Bore Size No.	1000	3000	5000
1.000 / 2.750	0.026	0.010	0.006
3.000 / 5.000	0.040	0.030	0.007
5.250 / 8.500	0.050	0.033	0.008
9.000 / 14.000	0.064	0.044	0.009
Minimize clearances for optimum performance. Clearances shown in shaded area require use of piston bearings.

T-LON "R" Series Piston Seal Sizes
Groove dimentions conform to American National Standard,
ANSI B93.32-1973 and NFPA T3.19.18

Part No.	Bore Dia. ±.002 (C)	Groove Dimension		Ring Dimension			Square Loader No.
Part No.	Bore Dia. ±.002 (C)	Dia ±.002 (A)	Width ±.002 (B)	Ring O.D. Dia (D)	C-S ±.005 (T)	Width ±.002 (H)	Square Loader No.
R-18	5.250	4.488	0.379	5.280-5.311	0.142	0.365	-425
R-19	5.500	4.738		5.530-5.563			-427
R-20	5.750	4.988		5.780-5.814			-429
R-21	6.000	5.238		6.030-6.066			-431
R-21.5	6.250	5.488		6.270-6.307			-433
R-22	6.500	5.738		6.530-6.569			-435
R-22.5	6.750	5.988		6.780-6.821			-437
R-23	7.000	6.238		7.030-7.073			-438
R-23.5	7.250	6.488		7.280-7.324			-439
R-24	7.500	6.738		7.530-7.575			-440
R-24.5	7.750	6.988		7.780-7.826			-441
R-25	8.000	7.238		8.030-8.078			-442
R-25.5	8.250	7.488		8.280-8.329			-443
R-26	8.500	7.738		8.530-8.581			-444
R-27	9.000	8.122		9.030-9.084	0.202		-445
R-28	9.500	8.622		9.530-9.587			-446
R-29	10.000	9.122		10.030-10.090			-447
R-29.5	10.500	9.622		10.530-10.590			-448
R-30	11.000	10.122		11.030-11.096			-449
R-31	12.000	11.122		12.030-12.102			-451
R-32	13.000	12.122		13.030-13.108			-453
R-33	14.000	13.122		14.030-14.114			-455

Material Code	Filled PTFE Material
T-LON-03	15% Glass (Gold)
T-LON-09	25% Glass (Blue)
T-LON-22	60% Bronze
T-LON-31	15% Glass - 5% Moly

LOADER MATERIAL:
BUNA N70 (NBR)

NOTE: Other materials available upon request.

	T-LON
	262.367.2333 888.340.TLON 262.367.8159 (fax) 1110 Richards Road Hartland, WI 53029 sales@t-lon.com
	© 2008 T-LON Products, Inc. All Rights Reserved. Designed and Hosted by SKC Group, Inc.